Hacía ya tiempo que no sabíamos de él, pero acabamos de conocer un par de nuevas actualizaciones de éste conocidísimo homebrew de la scene de PS2.
Para los que no esteis familiarizados con él, básicamente nos permite acceder a homebrew y modificar el menú de nuestras PS2 con un simple programa instalado en la tarjeta de memoria.
¡La versión 1.90 de FMCB ha sido publicada! Ahora funciona en consolas con Protokernel (en su mayoría, aunque hay algunos problemas), el OSD del HDD y la PSX (unidad DVR, sólo lanzada en Japón)
La idea es que sea la versión de nueva generación del FMCB, ya que ahora se añade soporte para el disco duro (con FHDB, la versión de FMCB con HDD activado). La versión 1.8c será la versión estable, mientras que la serie 1.90 será la versión de prueba, y soportará actualizaciones hasta llegar a ser estable.
¿Qué es el FHDB?
El Arranque Libre de la Unidad de Disco Duro (Free Harddisk Drive Boot, FHDB) es básicamente un FMCB que se instala dentro del HDD de la PS2. Hace lo mismo que el FMCB normal, pero está pensado para usarse con el HDDOSD de Sony (Actualización del navegador v 2.00)
Versiones parcheadas o modificadas del HDDOSD pueden no funcionar, así como no son soportados por el FHDB discos que no sean de Sony.
**Si el HDD OSD soporta discos que no son de Sony o no dependerá de si fue modificado para ello***
Modificar u obtener una copia premodificada del HDDOSD no es parte del proyecto.
Novedades
*Más pequeño, rápido y estable.
*Añadido soporte a la unidad de HDD.
*Las primeras tiradas de PS2 japonesas, también conocidas como PCMCIA (SCPH-10000, SCPH-15000 and SCPH-18000) tienen soporte completo.
*Las consolas chinas ahora tienen soporte (aquellas acabadas en 9)
*Si dejas la tapa o bandeja de disco abierta, el FMCB o FHDB no arrancará.
*Tu historial de juego se seguirá actualizando. Las torres del menú de la consola seguirán creciendo.
Cambios técnicos
Por comodidad, os citaré el original en inglés...aunque si alguien lo quiere en castellano, que lo pida
Initialization code has been cut down.
Some IRX modules (init.irx and chkesr.irx) have been removed (superceded by code that runs from the EE, like their Sony originals).
DVD player selection code has been replaced with one similar to the one used by Sony.
The console initialization code has been replaced with a Sony-like version.
CNF parsing code has been optimized.
The memory map has been adjusted slightly, so everything now fits below Sony's idea of "user memory" (below 0x00100000).
Support for the Protokernel and all HDD OSDs have been added.
(For the HDDOSD version of FMCB only) ELFs can be booted from any partition on the HDD. The format of the path is <partition>:<full path to file on pfs:/>. (e.g. hdd0:__sysconffs:/FMCB/FMCB_configurator.elf).
This can be easily set using the included FMCB/FHDB configurator.
The CD/DVD drive will now be stopped if a normal ELF is started (Under the assumption that most homebrew ELFs probably won't ever use the drive).
The user's history file (the file which affects the towers within the "Sony Computer Entertainment" startup screen) will now be updated whenever Playstation/Playstation 2 game/software discs are launched, as well as DVD video discs.
Reloading the OSD from within the OSD triggers a full reload of FMCB, because the protokernel OSDs seem to become really unstable after a few resets.
(I couldn't find out why... so a full memory wipe and reload by the kernel is probably the best way to do it).
The location of ESR will now be checked only when ESR is requested to be loaded.
The embedded EELOAD module has been cleaned up, and loads at 0x00082000 instead (Like rom0:EELOAD does).
FMCB has been split into two. The part of FMCB which remains resident will be copied into its place during runtime, allowing the initialization part of it to have the entire PlayStation 2 for initialization and drawing something nice on the screen (Not done at the moment as it makes FMCB quite a fair bit larger).
Full support for the SCPH-10000 and SCPH-15000. Not only will it patch up the SCPH-10000 v1.00 kernel fully (Applies OSD argument-passing patch), it also includes its own HDD support modules and can act as a replacement for the Sony system driver update.
Prototype support for the PSX. Its OSD is not supported, meaning that there will be no hacked OSD for the PSX.
Supports non-Sony HDD units (Support for non-Sony HDD units within the HDD OSD/browser v2.00 update depends on the HDD OSD itself).
New FMCB configurator program which supports the HDD unit.
Added support for the Chinese consoles (Magicgate region 09, folder letter C. e.g. SCPH-50009).
Fuente
Descarga 1.9.2