Custom Firmware 6.35 PRO-B3, is compatible with all models of PSP (including PSP Go) and is functional on 6.35 firmware.
PRO-B3 6.35 TCFW loads through ram memory and therefore when your PSP is completely off (battery for example) you'll need to start it.
Features
• Compatible with ISO / CSO from the XMB.
• VSH menu.
• Ability to play the latest games.
• Connecting to the PlayStation Network.
• Support for PSX games.
• Recovery Menu.
• Debug Type Regions.
Changes added in different published versions:
Spoiler:
Requirements:
- PSP (FAT, SLIM, 3000 or Go) with firmware 6.35 (or less).
- Memory Stick.
- PC.
- USB cable or card reader.
6.35 OFFICIAL FIRMWARE INSTALLATION
Download the 6.35 Official Firmware.
For PSP FAT, Slim & 3000
6.35 update for PSP - Megaupload
6.35 update for PSP - Filefactory
6.35 update for PSP - Mediafire
For PSP Go
PSP Go update 6.35 - Megaupload
PSP Go update 6.35 - Filefactory
PSP Go update 6.35 - Mediafire
- Unzip the zip file, connect the PSP to PC with USB cable and copy the PSP folder to the root of the memory stick of the PSP.
- Run the update from the menu of your PSP games in the section of the Memory Stick (remember that you must have a charged battery to 78% or more and the PSP connected to the charger) and follow the steps of the update.
- When installation is complete we must press X to restart the PSP.
TEMPORARY INSTALLATION OF CUSTOM FIRMWARE 6.35-B3 PRO
- Download and unzip the 6.35 TCFW PRO-B3.
- We connect the PSP to PC via USB cable.
- Copy the PSP folder from the download into the root of the Memory Stick replaced when required.
- In the menu on your PSP go to Games and enter Memory Stick.
- Run the PRO-B 6.35 Updater.
- Later we´ll see this screen where we see the following:
• Press X to launch CFW.
• Press Triangle to uninstall CFW.
• Hold L to reinstall CFW.
• Press R to exit.
- Press X and install the CFW, later we return to press X to load it.
- We return to the XMB with the PRO-B3 6.35 TCFW already loaded. We can check this in Settings--> System Settings--> System Information.
VSH MENU
Once we have the PRO-B3 6.35, pressing Select( ) can be loaded a menu that offers set various things, this menu is called PRO VSH MENU.
The options are the following:
• CPU Clock XMB - Change CPU speed in the XMB.
• CPU Clock Game - Change the speed of the CPU in games.
• USB Device - Allows you to choose where it will connect the PC, to connect the PSP in USB mode (Memory Stick, UMD, flash0, flash1...)
• UMD ISO Mode - Allows to change the drivers that will be used to read the backups (M33, Sony NP9660...)
• Recovery Menu - Access the Recovery Menu.
• Device Shutdown - Shutdown the PSP (we lost the temporary Custom Firmware).
• Suspend Device - Turns the PSP into sleep mode.
• Device Reset - Reset the system(we lost the temporary Custom Firmware).
• VSH Reset - Resets the system (without leaving the CFW).
• Exit - Exit the menu (or press Select).
From the Recovery menu you can configure more things.