parece ser que los chicos de ps3 news han podido acceder al 100% el service mode en la ps3 aki les dejo la noticia:
Finalmente se logró obtener un modo de servicio en pleno funcionamiento PlayStation 3, así el Desarrollo de PS3 está en progreso. Como llegó hace unos días, no hemos tenido demasiado tiempo para jugar con él todavía, pero pronto!
Hicimos un trabajo sobre uno de flurix hace un tiempo, pero por desgracia, la unidad no funciona plenamente. Afortunadamente, esta unidad se trabaja perfectamente.
Para un poco de historia, es una unidad de CECHA00, lo que lo convierte en un modelo de 60GB Japaneese PS3, la primera generación - retrocompatible, lectores de tarjetas y Wi-Fi!
Parece ser una unidad regresó, ya que ha sido envasado en una caja de CECHE, y tenía una serie CECHE falsas sobre ella. Por lo que sabemos hasta la fecha, la primera cosa que sucede cuando una unidad de éxitos de Sony se va a restablecer en PS3 Modo de servicio a través del USB JIG PS3.
Después de esto, se analiza el número de serie en la espalda. Asumimos que en este momento se dieron cuenta de que era falsa, y lo envió de vuelta, no se repara. Desde que fue enviado de vuelta, todavía, por suerte, el modo en servicio - permitiéndonos obtener de él!
Nuestro objetivo del proyecto es ser capaz de convertir esta unidad de prueba en un completo soplado PS3 / unidad de depuración, ya que sería útil que todos tenían acceso a una unidad de desarrollo con el fin de explorar completamente la PS3. Por supuesto, poner una PS3 al por menor en un modo de servicio de la consola es otra bestia para hacer frente antes de que eso ocurra.
La PS3 Modo de Servicio de Sistemas de no utilizar una unidad de disco duro, totalmente no detectar (como sabemos) para la instalación de un PUP es la forma normal de la cuestión (falla).
Sin embargo, hay otra manera de instalar un PUP. Hemos tenido tiempo para experimentar brevemente con algunos cachorros, y en el momento un PUP depuración FULL instala perfectamente, pero no puede arrancar. Creemos que esto se debe al paquete de Core OS en el PUP.
Con una astucia poco creativo (que será detallado en un post posterior) de la PUP en sí, hemos sido capaces de conseguir la unidad de servicio de modo de instalar un firmware de depuración híbridos, como método de PS3 XVISTAMAN2005 de disco duro de intercambio que Sony tarde bloqueada.
Podemos utilizar el mismo truco creativo para degradar a la unidad y, sin embargo, la cuestión se convierte en el núcleo del sistema operativo es menor, y tiene que ser la versión del mismo software. Aquí es donde nos encontramos en los pocos días con la unidad de modo theService.
Actualmente estamos estudiando formas de evitar esta última una falla - y después de eso, podemos ser capaces de degradar correctamente las unidades, así como la instalación de depuración de firmware en ellos.
El siguiente paso es la instalación de hardware para facilitar el vertido de la NAND. Esto nos permitirá cambiar el firmware, a continuación, descarga y comparar las imágenes NAND para ver si el identificador de objetivo en los cambios EID - si lo hace, este método resultará ser muy, muy útil!
We finally managed to obtain a fully operational Service Mode PlayStation 3 system, so PS3 Dev work is in progress. As it came a few days ago, we have not had too much time to play with it yet, but will soon!
We did some work on one from flurix a while back, but alas, the unit did not function fully. Luckily, this unit we got works perfectly.
For a little background, it is a CECHA00 unit, which makes it a 60gb Japaneese PS3 model, first generation – full of backwards compatability, card readers and WiFi!
It appears to be a returned unit, as it was packed in a CECHE box, and had a false CECHE serial on it. From what we know to date, the first thing that happens when a unit hits Sony is to be reset into PS3 Service Mode via the PS3 USB JIG.
After this, the serial number on the back is scanned. We assume at this point they realized it was false, and sent it back, not repaired. Since it was sent back, it was still, luckily, inService Mode – letting us obtain of it!
Our project goal is to be able to turn this unit into a full blown PS3 Test/Debug unit, as it would help if everyone had access to a development unit in order to fully explore the PS3. Of course putting a retail PS3 into a Service Mode console is another beast to tackle before that happens.
The PS3 Service Mode Systems do not utilize a hard disk drive, they totally fail to detect it (as we know) so installing a PUP the normal way is out of the question (it fails).
However, there is another way to install a PUP. We had time to briefly experiment with some PUPs, and at the moment a FULL Debug PUP installs perfectly, but fails to boot. We believe this is due to the Core OS package in the PUP.
With a little creative trickery (that will be detailed in a later post) on the PUP itself, we were able to get the Service Mode unit to install a Hybrid Debug Firmware, just like XVISTAMAN2005’s PS3 HDD swap method that Sony later blocked.
We can use the same creative trickery to downgrade the unit as well, however, the issue becomes that the Core OS is retail, and has to be the same software version. This is where we are at after a few days with theService Mode unit.
We are currently looking into ways to bypass this one last flaw – and after that, we may be able to successfully downgrade units, as well as install Debug Firmware on them.
The next step is to install hardware to facilitate the dumping of the NAND. This will allow us to change the firmware, then dump and compare the NAND images to see if the Target ID in the EID changes – if it does, this method will prove to be very, very useful!
fuente:
http://www.ps3news.com/PS3-Dev/project- ... -progress/